


Lyona l2100WPRO
The basic requirement for therapy and treatment of newborns, and in particular the ones with Low Birth Weight, is to have a temperature-controlled environment. To achieve this goal there are currently many methods which require usage of various devices, among which the most common, other than incubators, are the Infant Warmers. That is to say, open incubators with infrared radiant heating. These are most often used in delivery rooms and in intensive therapy centers. This system, which allows fast and easy access to the newborn, is the most used and efficient method for maintaining both the baby’s body and the bed at an ideal temperature.
TECHNICAL INFORMATION
Apgar timer (1-5-10 min)
Phototherapy duration timer
Electric controller with three modes: prewarm - manual - baby
Skin sensor to control the baby's body temperature in baby mod e
Easy access to the new born through the rotating capability of warmer to both sides
Cooling fan installed inside the warmer section for air conditioning
Two ceramic heaters to warm the bed and baby
Warmer guard to prevent the hand entry to the heater compartment
Protective foam to prevent damage to the user's head
X- Ray permeable mattress
Butterfly shields and gauges on both sides with polyamide plastic holders
Five failure alarms: over temperature, power failure, setting, checking and H/L
Holding handle in the main column for easy movement and install required accessories
Stand on both sides of the device to place the monitor and pulse oximeter
Trend/Rev.Trend, adjustment by means of gas spring
Fixed handle for Trend / Rev. Trend, adjustment
ABS cover for warmer and mattress platform
Tray for holding baby items on the base
Electrostatic powder coating
Four plastic swivel castors with 2 independent brakes in the front
Two oxygen cylinder holders
With IV pole holder on both sides
LED phototherapy lamps with a wavelength of 465 - 470 nano meter
Main power supply 220V - 50 Hz, 24 DC
Maximum power output 1200 VA
دارای نگهدارنده سرم خم دار
Light LED bulb
DIMENSIONS and BASICINFORMATION
Overall 1200 x 1060 x 1790 (mm)
Heater height up to mattress 750mm ± 10mm
Trend / Rev. Trend angle +15º / -15º
baby mode control range 34.5°C - 37.5°C
Angle of warmer module 0°, 30°, 60°, 90° for two ways
Accuracy of skin temperature sensor ± 0.1˚ C
Max load capacity 40 Kg
Bed net weight 110 Kg
Safe working load capacity 10 Kg
ENVIRONMENTAL TEMPERATURE :
Operating range 18°C - 30°C
STANDARDS
ISO 9001
ISO 13485
EN ISO 15223-1
EN ISO 14971
IEC 60601-1
IEC 60601-2-21
IEC 60601-2-50
IEC 62304
ACCESSORIES (Optional)
Two oxygen cylinder holders
Latest products
-
Asa R6120
ASA R6120 foldable patient bed is made from the best raw materials available in the market so that you can use it easily and with peace of mind. Material of seat and arm...
-
Pedia B0050.1:2018
A children's bed with two pieces of 1.5 mm metal bottom with reinforced and strong chassis can be the best option to buy. Sina children's bed wheels...
-
SCALA T4301PRC
Scala series beds are used in intensive care units. The system of these beds is easy to use in order to meet the needs of nurses and patients and create a sense of security and comfort for patients...
-
Stra 4143.1
Moving the patient is important and effective not only for the patient but also for the nurses. In Sina, we believe that the first steps in direct confrontation with...
-
M52.5
The plastic footboard is made of ABS plastic, which can be easily used and disinfected. This four plastic four plastic double bed wardrobe...
-
Stra 4243
Moving the patient is important and effective not only for the patient but also for the nurses. In Sina, we believe that the first steps in direct confrontation with...
-
SCALA T4401PROO.1
Scala series beds are used in intensive care units. The system of these beds is easy to use in order to meet the needs of nurses and patients and create a sense of security and comfort for patients...
-
SCALA T2101POOO
Scala series beds are used in intensive care units. The system of these beds is easy to use in order to meet the needs of nurses and patients and create a sense of security and comfort for patients...
-
SCALA T4301PRO
Scala series beds are used in intensive care units. The system of these beds is easy to use in order to meet the needs of nurses and patients and create a sense of security and comfort for patients...
-
OBT 02
The OBT 02 model hospital dining table is produced in Sina Hamdaria company, which is made of ABS plastic that can be washed and disinfected. bases ...



